They where they are now moveing over to the UCCNC system.
I haven't seen this posted here in the Novakon forum so I thought I would share as most OEM Novakon machines are running Mach 3 ...
https://www.cnczone.com/forums/mach-...on-1803-a.html
Ray
Similar Threads:
They where they are now moveing over to the UCCNC system.
<img src="https://ivxo1q-dm2305.files.1drv.com/y4mENMmTr_Cabc7pR0FUdB6gtbADq2JbuG4_rGy0eBQvLJx19pTi6TqMUIJN0xgOyDIc0gWoxYhS38HpbSTFGdfaK-o42IOU6jczrhDpfpCOTNGL1X6hvZCbgj0y35gqmq1YGTrWwShYGV-C7lXA2esy0Pi_WfnBSyroDLSGXwce4uSr1U7op7srdi78rispHCa_K4aFlTlJPVkkNWMfgh_Tg?width=60&height=60&cropmode=none" width="60" height="60" />
Being Disabled is OK CNC is For fuN