Torus Pro with servos and 4th axis - Page 11

Page 11 of 11 FirstFirst ... 891011
Results 201 to 218 of 218

Thread: Torus Pro with servos and 4th axis

  1. #201
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis

    maybe not quite as flattering. I think I isolated the spindle rpm changes to the estop being flaky. The factory one had kinda fallen apart, so I put in another one I had.....it was the flaky one. After removing it and jumpering the wires together, I haven't had any rpm fluctuations like that.



    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  2. #202
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis

    I didn't put the lathe ops here, but I do have vids of them on my channel. This vid is actually pretty cool......at least I like it....especially the chamfering op at the end.



    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  3. #203
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis





    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  4. #204
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis



    Last edited by mklotz70; 10-25-2017 at 05:55 AM.
    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  5. #205
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis



    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  6. #206
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis



    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  7. #207
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis





    Last edited by mklotz70; 10-25-2017 at 08:45 AM.
    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  8. #208
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis



    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  9. #209
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis






    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  10. #210
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis





    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  11. #211
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis





    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  12. #212
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis



    - - - Updated - - -

    Maybe I shouldn't wait 10 months to post what I'm up to. lol

    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  13. #213
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis

    LOL!!! My last post said I shouldn't wait 10 months to post on here........and now it's been over 3 years.

    I'll see if I can post a few vids here of stuff dealing with my mill.


    How I set tool lengths




    A chip guard/shield I added to the Z axis




    A shelf I made for the coolant




    What I did for a tank....way better than the laundry soap jug in the shelf video




    Shower curtain chip containment




    I love these jaws!!! I can grab the saw cut sides without having to clean them up first.




    Replacing the rear Y axis bellows


    Last edited by mklotz70; 02-11-2021 at 07:33 AM.
    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  14. #214
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis

    Modifying a 13" set of rotors



    Bit of mill turning. I now have a Tormach 15L Slant Pro to do this work on.



    Thread milling - testing and final use






    "One off" set of brackets I did.






    A couple of upper control arms. One is solid, the other is two pieces





    Ball joint covers for the above arms. I stalled/crashed the spindle in the just after the 1min mark




    Nearly wet myself




    There's more on my bluehandsvideo youtube channel, so I'll call this enough for now.

    Last edited by mklotz70; 02-11-2021 at 07:52 AM.
    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  15. #215
    Member
    Join Date
    Dec 2009
    Location
    USA
    Posts
    590
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis

    I watched the first thread milling video. From my experience I needed to adjust the nominal diameter of the thread mill in my software to get proper fits. Each thread mill is a bit different.



  16. #216
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis

    kvom.....good to know. Thanks! It's the only thread mill I had and that was the first time using it. I'll probably have to go through the entire testing process again when I have to do it again. lol
    hhhmmm......the forum won't let me edit any of my posts....need to change one of the vid links.

    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  17. #217
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    340
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis

    I noticed in #214 above that the same vid was linked twice. I guess the forum has a time limit on when you can edit. Not that anyone is watching, but here's the link to the one piece UCA made from a water jet cut blank.



    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  18. #218
    Member
    Join Date
    Dec 2009
    Location
    USA
    Posts
    590
    Downloads
    0
    Uploads
    0

    Default Re: Torus Pro with servos and 4th axis

    Interesting that you chamfered the soft jaws. Never needed to do so myself.



Page 11 of 11 FirstFirst ... 891011

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Torus Pro with servos and 4th axis

Torus Pro with servos and 4th axis

Torus Pro with servos and 4th axis