Good job.
I think you will really like it. Mine is away from the wall enough so that the door on the cabinet will open. This leaves plenty of room behind the machine to get at stuff. I also hide my small compressor in the corner behind the Torus, so double duty for that space. I did add an extra larger drain in mine. The original drain is maybe a 3/4" hole at the right rear corner of the pan. I installed a bath sink drain in the front right corner and use some reinforced clear tube to route it into the coolant tank.
One of the first things you might want to tackle is to make a new drawbar. The square head design my Torus came with is not suitable for fast tool changes.
Looking forward to seeing pics and reading about it. It is a pity that this is the last one.
It is a nice machine at a low price point. I would probably have paid the extra for the Pulsar without balking though. Lots of nicer features than the Torus.