Novakon NM-200 S2 Review - Page 2

Page 2 of 2 FirstFirst 12
Results 13 to 14 of 14

Thread: Novakon NM-200 S2 Review

  1. #13
    Registered
    Join Date
    Dec 2009
    Location
    USA
    Posts
    558
    Downloads
    0
    Uploads
    0

    Default

    I've had the same issues with the coolant pump. One thing I needed to do was shorten the feed tube to the minimum needed (this reduces the weight of the coolant in the tube). I've also found that when the flow wimps out, stopping and starting the pump seems to restore the pressure. I was looking at replacing it with an immersion pump in a rubbermaid container as other have done, but couldn't find one here with a 220V motor that I could control with the stock wiring. I didn't want to mess around with any wiring so I've letting it be. In any case I don't let the mill run unattended so I can manage with it the way it is (for now).

    I also have the tall column, but use a cast iron tilt table to raise my vise(s).



  2. #14
    *Registered User* Resendiz's Avatar
    Join Date
    Nov 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Novakon NM-200 S2 Review

    T handle L ratchet locked in the spindle head. How to unlock spindle head so I can release the T handle L ratchet



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Novakon NM-200 S2 Review

Novakon NM-200 S2 Review