Projects Made on the Novakon/Bodor Laser

Results 1 to 2 of 2

Thread: Projects Made on the Novakon/Bodor Laser

  1. #1
    Registered
    Join Date
    Feb 2010
    Location
    U.S.A.
    Posts
    132
    Downloads
    0
    Uploads
    0

    Default Projects Made on the Novakon/Bodor Laser

    Show off the projects you have made with your machine.

    To start it off here are a few of mine;

    An Eagle cut from 1/8 Acrylic.

    Policeman's Prayer engraved in Cherry wood.

    Words scanned on a Bamboo cutting board.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Projects Made on the Novakon/Bodor Laser-acrylic-eagle-stand-jpg   Projects Made on the Novakon/Bodor Laser-mhpd-jpg   Projects Made on the Novakon/Bodor Laser-words-cutting-board-jpg  


  2. #2
    Member
    Join Date
    Feb 2010
    Location
    United States
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default Re: Projects Made on the Novakon/Bodor Laser

    The Novakon/Bodor laser cutter/engraver machine exceeded my expectations today. I was able to cut 3/4" acrylic and 3/4" plywood in one pass with out having smoke or burn marks on the top or bottom of the material.

    The chess pieces were cut from 1/4", 3/8", 1/2" and 3/4" cast acrylic. The acrylic edge finish was super smooth and did not require any additional finishing. The doll furnitur was cut from 3/4" five ply plywood without smoke or burn marks. No masking or taping of the wood was required. Again, all materials were cut in one pass.

    Attached Thumbnails Attached Thumbnails Projects Made on the Novakon/Bodor Laser-dsc08021-jpg   Projects Made on the Novakon/Bodor Laser-dsc07978-jpg   Projects Made on the Novakon/Bodor Laser-dsc08011-jpg   Projects Made on the Novakon/Bodor Laser-dsc08009-jpg  

    Projects Made on the Novakon/Bodor Laser-dsc08010-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Projects Made on the Novakon/Bodor Laser

Projects Made on the Novakon/Bodor Laser

Projects Made on the Novakon/Bodor Laser