Designing, milling AND building a box for the elektronics!


Results 1 to 3 of 3

Thread: Designing, milling AND building a box for the elektronics!

  1. #1
    Registered
    Join Date
    Sep 2017
    Location
    Norway
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Designing, milling AND building a box for the elektronics!

    Designing the electronics box for my first DIY CNC machine!! :-)

    Jeg designer lektronikk boksen tl min første DIY CNC maskin :-)



    Similar Threads:


  2. #2
    Registered
    Join Date
    Sep 2017
    Location
    Norway
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Designing, milling AND building a box for the elektronics!

    Milling the walls (sides) for the box!! :-)

    Skjærer ut sidene på boksen





  3. #3
    Registered
    Join Date
    Sep 2017
    Location
    Norway
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Designing, milling AND building a box for the elektronics!

    And then I finally assemble the box!

    Så setter jeg sammen den nye boksen





Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Designing, milling AND building a box for the elektronics!

Designing, milling AND building a box for the elektronics!