Linære guider/rails


Results 1 to 1 of 1

Thread: Linære guider/rails

  1. #1
    Registered
    Join Date
    Jun 2012
    Location
    Norway
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Linære guider/rails

    Hei,

    Skal lage min første cnc router og lurer derfor på hva jeg kan bruke som rails/guider?
    Har noen slike til salgs?

    Dimensjon på routeren tenkte jeg skulle være ca. 500mmx500mm ish

    Similar Threads:
    Last edited by hardwax; 09-24-2017 at 06:14 AM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Linære guider/rails

Linære guider/rails