FADAL 1010-5A Spindle Card with Rigid Tap

[ballistic42]

Selling a 1010-5A spindle card that I thought I needed but ended up being a different problem. The card works with no issues and is clean. The card has the rigid tap eproms and works like it should.
I am selling for $475.00 with free shipping to the lower 48. If you want Rigid tap for your machine you will need the eproms and put them into your card or use this one. Other items you will need to make your machine rigid tap capable is, spindle motor encoder, Wire harness rigid tap Part # WIR-0160.
Message me and let me know if interested.

Thanks,
Jeff

Similar Threads:

• ST10Y Spindle wont spin rigid tap issue
• OSP-700M spindle index in G84/G284 rigid tap
• Problem- fadal vmc rigid tap
• Fadal: Adding rigid Tap