CNC converted Grizzly G0704 for sale

[109jb]

I have decided to sell my Grizzly G0704 that I converted to CNC a while back. I am selling because I have another CNC conversion almost complete and I no longer need this machine. I did use it tonight to make a few pieces and everything is working fine. Here are the specs and what is included

• Grizzly G0704 benchtop milling machine with stand and roller base
• Stock spindle motor
• Head spacer
• Column spacer
• Micro-V spindle drive
• 570 oz-in low inductance stepper motors on all 3 axes
• Keling 6050 drives on all axes
• Inductive limit/home switches (Very accurate homing)
• parallel port interface
• 50V computer server power supply (better than the cheap switching supplies)
• Old HP desktop computer with LinuxCNC installed (Old but works fine)
• 14 or 15 inch (can't remember which) flat screen monitor
• Keyboard and mouse
• Computer stand
• Includes drill chuck, key and arbor and tools for drawbar
• Used 4" keyed vise available for additional $50

I'm only asking $2000 ($2050 with vise), which I think is more than fair considering that a non-cnc G0704 currently lists for $1650. The machine is located in Morris, Illinois, about an hour southwest of Chicago
PM me if interested or e-mail me at j dot brannen at yahoo dot com

and here are some pictures:

Similar Threads:

• NEED HELP getting KFLOP & MACH3 setup to run a Grizzly G0704 Converted to CNC
• WTB CONVERTED G0704 COMPLETE
• Any G0704 For Sale - converted or not
• Considering purchase of converted G0704. Have questions?
• Need Help with Grizzly G0704 Converted to CNC

[109jb]

Here are some videos of the machine from various times in the past.

[109jb]

SOLD.