[FONT="]PCNC440[/FONT]
[FONT="]Power Drawbar w/ foot petal[/FONT]
[FONT="]4in vise[/FONT]
[FONT="]Quick Change Pallet System w/ pallets[/FONT]
[FONT="]1/5hp Flood Coolant w 15gal tank[/FONT]
[FONT="]Chip pan[/FONT]
[FONT="]CarveSmart master Jaws, 3ft of extra jaw material for soft Jaws [/FONT]
[FONT="]Sealed, filtered and air cooled Path Pilot with 2.0 upgraded controller[/FONT]
[FONT="]Monitor, keyboard, mouse & pendant jogger[/FONT]
I built a stainless cart and plexiglass enclosure for the mill, both are very compact and work very well. We are a full time machine and fabrication shop, we have had Tormach machines for years. We bought the 440 for a couple specific jobs we had, it has run about 500 to 800 small parts, light duty aluminum only, never crashed. Everything is in great shape, near new, selling because I need the room for a lathe. I also have some other small items that will help you get started if need be; parallels stops, 123 blocks etc I can include if you want. I'm happy to help get you up and running. This is a great machine with lots of extras. We have forklift to load mill, everything will fit in a pickup, located in Apple Valley, Southern California, 92307