- Break Arcs Into Lines Issue
-
Registered
Break Arcs Into Lines Issue
Hi Scott,
#1 :
the following code works fine with G3 but breaking the arc into lines the center of the helix is shifted in -Y direction with every 360 degrees.
Seemes to be a calculation problem.
O40
G90 G80 G54 G0 X50. Y50.
G43 Z20. H1 S1000
G1 Z0. F1000
G91 G41 G1 X18. Y0. F400
P41 M98 L5
G91 G40 G1 X-18. Y0.
G90 G0 Z10.
M2
O41
G91 G3 I-18. J0. Z-8.
M99
#2 :
Could you please add a default value in the Break Arcs Into Lines dialogue ' Enter maximum path deviation distance:' ?
Thanks
Richard
Similar Threads:
-
-
Registered
Richard,
Thanks, I'm still checking on this...
Scott
- Break Arcs Into Lines Issue
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules