Newbie Classical guitar neck carving

Results 1 to 2 of 2

Thread: Classical guitar neck carving

  1. #1
    Registered
    Join Date
    May 2018
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Classical guitar neck carving

    Hello All,

    I make traditional Spanish classical and flamenco guitars, and am interested in setting up a dedicated CNC router for carving necks. You won't be surprised, as fellow guitar makers, that I'm looking at DIY kits as the least expensive way of getting into CNC. I'm perfectly happy to have a slow and moderately accurate machine, as long as it can be left on its own, while I work on other parts.

    I've had a lot of experience building and working on woodworking machinery, so the DIY kits look straightforward.

    Any advice from those of you that have been there and done that would be most appreciated (:->)...

    Cheers,

    Brian Burns

    Brian Burns Guitars

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2008
    Location
    USA
    Posts
    683
    Downloads
    0
    Uploads
    0

    Default Re: Classical guitar neck carving

    I am PMing you. I'm not too far and have a small router for sale



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Classical guitar neck carving

Classical guitar neck carving