Tele cad drawings - Page 3

Page 3 of 4 FirstFirst 1234 LastLast
Results 41 to 60 of 68

Thread: Tele cad drawings

  1. #41
    Registered
    Join Date
    Nov 2007
    Location
    USA
    Posts
    89
    Downloads
    0
    Uploads
    0

    Default

    Hi and Welcome....PM or email me and I can send you the thinline dxf file. The conversion from the Fender pdf to a dxf is easy if you have the right software.
    Again...welcome!
    Cheers
    ED

    PS...check out www.tdpri.com for all tele stuff!



  2. #42
    Registered
    Join Date
    Jan 2008
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Hi Ed
    Do you think i could get that dxf for the tele thinline?
    Thank you
    Joe



  3. #43
    Registered
    Join Date
    Nov 2007
    Location
    USA
    Posts
    89
    Downloads
    0
    Uploads
    0

    Default

    Hi Joe...sorry that I don't get here much...I'm always over at www.tdpri.com though. PM me with your email and I'll send you the tele files or visit the web page above. My name there is ehawley also.
    Cheers
    ED



  4. #44
    Registered
    Join Date
    Jul 2008
    Location
    switzerland
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Telecaster Files

    Quote Originally Posted by ehawley View Post
    Hi Joe...sorry that I don't get here much...I'm always over at www.tdpri.com though. PM me with your email and I'll send you the tele files or visit the web page above. My name there is ehawley also.
    Cheers
    ED
    Hi!
    I am looking to find a tele file;Can you please send me Telecaster files in Corel or Autocad!THANKS Lubi



  5. #45
    Registered
    Join Date
    Nov 2007
    Location
    USA
    Posts
    89
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by lubi52 View Post
    Hi!
    I am looking to find a tele file;Can you please send me Telecaster files in Corel or Autocad!THANKS Lubi
    Hi...check out my cnc broadcaster build thread in this forum. Th files you want are there.
    Cheers
    ED



  6. #46
    Registered
    Join Date
    May 2008
    Location
    United States
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default

    Sorry this is a very noobish question but how do you take it from the dxf or from cad and make it into an actual object... (I dont have a cnc router yet but am looking into it) I understand it needs to be converted into G-code but how? I have a les paul file that I would like to make if I actually get a router but I dont know how I would be able to do it. I'm attaching the les paul file that I got from another forum thread on here and I view with the latest Rhino. Basically i just want to know how do i go about making that file into a living thrashing guitar.

    Attached Files Attached Files


  7. #47
    Registered
    Join Date
    Jul 2009
    Location
    usa
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default tele cad

    preparing a patent for electric guitar using tele as cad template.

    which software is easiest to modify, I have studied mechanical drawings in the olden days never on the computer. I have ZWCAD.



  8. #48
    Member
    Join Date
    Jun 2006
    Location
    Canada
    Posts
    629
    Downloads
    0
    Uploads
    0

    Default

    Here's a tele body made from Solid!

    Attached Thumbnails Attached Thumbnails Tele cad drawings-tele-jpg  
    "It's only funny until some one get's hurt, and then it's just hilarious!!" Mike Patton - Faith No More Ricochet


  9. #49
    Member
    Join Date
    May 2006
    Location
    USA
    Posts
    803
    Downloads
    0
    Uploads
    0

    Default

    "but how do you take it from the dxf or from cad and make it into an actual object" Ponchibego

    This is the "mystery" part of the biz. (Nah, not really)
    That is what I used to get paid well for,
    This requires knowledge of geometry, machining, tooling, software, on and on ......
    Where do you want to start?

    Been doing this too long


  10. #50
    Registered
    Join Date
    Nov 2009
    Location
    UK
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    .

    Last edited by ferg; 11-19-2009 at 08:26 AM. Reason: duplicate post


  11. #51
    Registered
    Join Date
    Nov 2009
    Location
    UK
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    anyone got models of a thinline or any other tele that would work in pro engineer?



  12. #52
    Registered
    Join Date
    Nov 2007
    Location
    USA
    Posts
    89
    Downloads
    0
    Uploads
    0

    Default

    Hi ferg...I don't have any thinline drawings, but you could wander...HERE and convert the pdf into pro engineer,scale it using the neck screw distance on the back (1.5 X 2"), and have what you need. Hope this helps.
    Cheers
    ED



  13. #53
    Registered
    Join Date
    Nov 2009
    Location
    UK
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    thanks very much, just a quick question to possibly make me the laziest git ever, is there any software that could do that fo rme or will i need to exercise my drawing skills?



  14. #54
    Member
    Join Date
    May 2006
    Location
    USA
    Posts
    803
    Downloads
    0
    Uploads
    0

    Default Magic software,

    If you find that software notify us, please,
    Management was trying for years to find that software rather than pay skilled engineers and CNC programmers for their knowledge.

    That would be cool,
    PDF in and solid model with CNC data out.

    Start warming up your drafting / modeling skills.
    That is a good clean pdf file.
    Best of wishes.

    Been doing this too long


  15. #55
    Registered
    Join Date
    Jan 2009
    Location
    USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Tele Guitar Body, Neck, and Pickguard 3D Cad Drawings

    I have SLDPRT, IGS, and STL versions of Tele Guitar Body, Neck, and Pickguard freely available on my website at: http://www.cockrum.net/lutherie.html

    Also, I have some misc CNC and lutherie stuff at: http://www.cockrum.net/cnc.html


    Chris

    "I do not think there is any thrill that can go
    through the human heart like that felt by the
    inventor as he sees some creation of the brain
    unfolding to success... Such emotions make a
    man forget food, sleep, friends, love, everything."
    - Nikola Tesla



  16. #56
    Registered
    Join Date
    Nov 2009
    Location
    UK
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default scaling

    im a student and havent had a lot of experience in drawing things in cad, most of our things have had step by step instructions on how to draw parts hence the pdf to cad gaffe. Whats the neck screw distance? and should i just be putting the pdf to 100% scale and then measuring the bolts or whatever, then finding out their real size and using a scale factor from those dimensions to find out the "true" dimensions of all the other curves etc?



  17. #57
    Registered
    Join Date
    Jan 2009
    Location
    USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    If you google "telecaster blueprint", the blueprint is the first image that shows up.

    http://www.google.com/search?q=telecaster+blueprint



  18. #58
    Registered
    Join Date
    Mar 2010
    Location
    Netherlands
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default dwg telecaster body

    Hallo,

    Can anybody send me a dwg drawing for telacaster body??
    I would like to make telecaster body from aluminum.
    But i don't have the dwg drawing with the measures.

    Thanks,gemaga



  19. #59
    Registered
    Join Date
    Jan 2009
    Location
    USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    Gemaga,

    I have SLDPRT, IGS, and STL versions of Tele Guitar Body, Neck, and Pickguard freely available on my website at: http://www.cockrum.net/lutherie.html

    The STL can be read by many 3D cad/cam packages including CamBam:
    http://www.cambam.co.uk/

    Chris

    "I do not think there is any thrill that can go
    through the human heart like that felt by the
    inventor as he sees some creation of the brain
    unfolding to success... Such emotions make a
    man forget food, sleep, friends, love, everything."
    - Nikola Tesla



  20. #60
    Registered
    Join Date
    Mar 2010
    Location
    ireland
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default class

    Quote Originally Posted by big_mak View Post
    Here's a tele body made from Solid!
    thats class did you cnc machine that.



Page 3 of 4 FirstFirst 1234 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tele cad drawings

Tele cad drawings