Newbie Multicam V Series Cannot find Hard Home!!!???


Results 1 to 3 of 3

Thread: Multicam V Series Cannot find Hard Home!!!???

  1. #1
    Member johnkemsley's Avatar
    Join Date
    Dec 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Exclamation Multicam V Series Cannot find Hard Home!!!???

    I have just set up my 5x10 Multicam V Series (2020) and I am trying to find machine hard home. The gantry went to the end of the y axis and was making alot of noise and stalled. It just kept shaking and could not find the y axis... what should I do or look for?

    Similar Threads:


  2. #2
    Member
    Join Date
    Jun 2010
    Location
    United States
    Posts
    459
    Downloads
    0
    Uploads
    0

    Default Re: Multicam V Series Cannot find Hard Home!!!???

    John this is a time where you should have someone come in and properly set up and train you on the machine.

    I'm pretty sure with a 2020 machine you did not get it for a song and a dance....

    Please I beg you ......Have someone come in and set it up



  3. #3
    Member
    Join Date
    Jun 2005
    Location
    USA
    Posts
    1723
    Downloads
    0
    Uploads
    0

    Default Re: Multicam V Series Cannot find Hard Home!!!???

    I agree have someone help u check out the machine. It could be a sensor but might be user error. You can cause damage if you are not sure what you are doing.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Multicam V Series Cannot find Hard Home!!!???

Multicam V Series Cannot find Hard Home!!!???