Add a LASER to Multicam Controller...


Results 1 to 1 of 1

Thread: Add a LASER to Multicam Controller...

  1. #1
    Member jimmycissell's Avatar
    Join Date
    Aug 2020
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Add a LASER to Multicam Controller...

    Hello folks. I have an SF series router that has been updated to the pendant controller RPD-24. I would very much like to add a J-tech or other laser to the router. Is there anyone out there who has done something similar or knows how to accomplish? I have experience adding lasers to open source controllers but the Multicam controllers are not so simple. I'd appreciate any help. Thanks!

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Add a LASER to Multicam Controller...-controller-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Add a LASER to Multicam Controller...

Add a LASER to Multicam Controller...

Add a LASER to Multicam Controller...