Not sure about the MC 3000 but the older MC's that used a Serial cable for connection to the computer, and used WinDNC (Win98) or MX32 to transfer files. If i'm not mistaken a DB-9 Null Modem cable is needed..
Hi, in our M2521 TCP port failed. I have to use Com-port RS-232.
I have drawn up a connection scheme and manufactured the cable.
But Multicam 3000 does not connect to PC.
?an you give a scheme of the cable and settings RS-232 for PC?
Similar Threads:
- Need computer cable for Gerber dimension 200 or pinout diagram for cable.
- Problem- Need computer cable for Gerber dimension 200 or pinout diagram for cable.
- Need Help!- Need pinout for Prolight 3000 lathe turret cable
- Upgraded 5 Axis CNC Breakout Board + DB25 Cable + 5V USB Cable + Mach3 Software
- Cable carrier competition: The way you use your cable carriers could earn you a cash
Not sure about the MC 3000 but the older MC's that used a Serial cable for connection to the computer, and used WinDNC (Win98) or MX32 to transfer files. If i'm not mistaken a DB-9 Null Modem cable is needed..
The problem is solved. I added CTS wire in the cable to the eight pin. I used 'Motion Connection' and 'Job Server' programs.