Problem Multicam 7000 Series Homing Issue


Results 1 to 1 of 1

Thread: Multicam 7000 Series Homing Issue

  1. #1

    Default Multicam 7000 Series Homing Issue

    We have a Multicam 7000 Series CNC Router and we are experiencing "X Homing Failed" issue. We have replaced both the Xa and Xb motors and the associated gearboxes. However, the machine does not home correctly and there is a calibration error also. We have tried homing by loosening the gantry screws as advised by the engineer. However, the issue does not seem to solve.

    We are a signage firm so we cut all sorts of materials with the CNC router. I would really appreciate your help on this matter.

    Thank you

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Multicam 7000 Series Homing Issue-homing-failed-issue-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Multicam 7000 Series Homing Issue

Multicam 7000 Series Homing Issue

Multicam 7000 Series Homing Issue