Newbie SF Model w/ Updated Pendant Style Controller, lost program


Results 1 to 4 of 4

Thread: SF Model w/ Updated Pendant Style Controller, lost program

  1. #1
    Member jimmycissell's Avatar
    Join Date
    Aug 2020
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default SF Model w/ Updated Pendant Style Controller, lost program

    Recently purchased an SF model that has the new controller installed on it (pic attached). I'm new to Multicam, been using a GRBL machine. I managed to get my laptop connected to the machine and was messing around in MotionMechanics. I was trying to locate the file directory for storing files. Long story short I went to File -> Store File and uploaded a simple G-code file where the program should be. Big mistake, gut hurts thinking about it. Can anyone help w/ getting a program installed back on the controller? I would really appreciate any help you can provide. Thanks.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails SF Model w/ Updated Pendant Style Controller, lost program-20200821_134455-jpg   SF Model w/ Updated Pendant Style Controller, lost program-20200821_134400-jpg  


  2. #2
    Member jimmycissell's Avatar
    Join Date
    Aug 2020
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: SF Model w/ Updated Pendant Style Controller, lost program

    Found a video where I had the startup, shows it loading up RPD24 Driver Module Version 1.25.



  3. #3
    Member jimmycissell's Avatar
    Join Date
    Aug 2020
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: SF Model w/ Updated Pendant Style Controller, lost program

    This is where (see pic) I sent a standard G-code text file to in MotionMechanic. Can anyone confirm that I overwrote the controller program? In times like this a man needs an UNDO button. Thanks folks.

    Attached Thumbnails Attached Thumbnails SF Model w/ Updated Pendant Style Controller, lost program-motionmechanic-jpg  


  4. #4
    Member
    Join Date
    Jun 2010
    Location
    United States
    Posts
    440
    Downloads
    0
    Uploads
    0

    Default Re: SF Model w/ Updated Pendant Style Controller, lost program

    Jimmy

    When you get a chance give me a call I might be able to help you out.

    Maurice
    MCP Service
    678-5481-483



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

SF Model w/ Updated Pendant Style Controller, lost program

SF Model w/ Updated Pendant Style Controller, lost program

SF Model w/ Updated Pendant Style Controller, lost program