- Newbie- SF Model w/ Updated Pendant Style Controller, lost program
-
Member
SF Model w/ Updated Pendant Style Controller, lost program
Recently purchased an SF model that has the new controller installed on it (pic attached). I'm new to Multicam, been using a GRBL machine. I managed to get my laptop connected to the machine and was messing around in MotionMechanics. I was trying to locate the file directory for storing files. Long story short I went to File -> Store File and uploaded a simple G-code file where the program should be. Big mistake, gut hurts thinking about it. Can anyone help w/ getting a program installed back on the controller? I would really appreciate any help you can provide. Thanks.
Similar Threads:
-
-
Member
Re: SF Model w/ Updated Pendant Style Controller, lost program
Found a video where I had the startup, shows it loading up RPD24 Driver Module Version 1.25.
-
Member
-
Member
Re: SF Model w/ Updated Pendant Style Controller, lost program
Jimmy
When you get a chance give me a call I might be able to help you out.
Maurice
MCP Service
678-5481-483
- Newbie- SF Model w/ Updated Pendant Style Controller, lost program
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules