SF Model w/ Updated Pendant Style Controller, lost program

[jimmycissell]

Recently purchased an SF model that has the new controller installed on it (pic attached). I'm new to Multicam, been using a GRBL machine. I managed to get my laptop connected to the machine and was messing around in MotionMechanics. I was trying to locate the file directory for storing files. Long story short I went to File -> Store File and uploaded a simple G-code file where the program should be. Big mistake, gut hurts thinking about it. Can anyone help w/ getting a program installed back on the controller? I would really appreciate any help you can provide. Thanks.

Similar Threads:

• Call Updated Sub Program
• New Machine Build- Photos of wood boxed cnc + Pendant usb steampunk style
• Updated plugin available for the ShuttleRU pendant
• Just got my updated super Pid controller
• Updated Lost Foam Casting - Web Page

[jimmycissell]

Found a video where I had the startup, shows it loading up RPD24 Driver Module Version 1.25.

[jimmycissell]

This is where (see pic) I sent a standard G-code text file to in MotionMechanic. Can anyone confirm that I overwrote the controller program? In times like this a man needs an UNDO button. Thanks folks.

[MCPservice]

Jimmy

When you get a chance give me a call I might be able to help you out.

Maurice
MCP Service
678-5481-483