Designer Series Gantry not sitting Square on side rails

[GLWDAVE]

Hi
Just purchased a 2002 designer series 2400 x 1200 table
The gantry dosnt sit square on the side rails so not all bearings are touching at the same time. When i measure from the gantry to the end of the table there seemes to be around 4mm diference left to right . How do i rectify this

Similar Threads:

• square AND round rails!?
• Budget square rails
• Z-axis - mounting rails on spindle side, rather than tower side
• Which is better, round or square rails?
• mounting linear rails side by side

[he1957]

Photographs of the machine and the structure/mounting arrangements of the gantry and table would go a long way in helping others help you :-)

Use the "Advanced" setting of the Forum to attach photographs.

[awerby]

Is the gantry bent? Is the table warped? Or is something in between grossly out of adjustment?

[GLWDAVE]

Hi Guys
Spoke to multicam today who said the gantry must have jumped a tooth in the move . Told me how to fix it . Thanks for the replies