- Multicam CNC Router 1000 series
-
Multicam CNC Router 1000 series
Hey, I'm having troubles getting the depth to set on my router. I don't know if it's a suction or mill problem. The depth won't set for any bits including our mill bit. Any help appreciated.
-
-
Member
Re: Multicam CNC Router 1000 series
What happens when you try? Describe the behaviour.
Did it work before?
What's changed between when it worked (assuming it did) and now?
-
Member
Re: Multicam CNC Router 1000 series
Explain what happens when you try to calibrate.
Is it immediately going up when you hit your 0 key or does it keep going down, and acts like it doesn't see the block.
-
Member
Re: Multicam CNC Router 1000 series
I had a similar problem. Turned out the surface block wire had broken internally. Check it for continuity.
- Multicam CNC Router 1000 series
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules