User manual for Multicam MG103

[forhire]

I was hoping to finish hooking this machine up but the offices are closed until Jan 2nd. Does anyone have a user manual for the Multicam MG103? I don't know if the user manual will have the schematic but that's really what I need. Thanks in advance.

Similar Threads:

• MULTICAM CNC user manual
• Need Help!- Daewoo Puma 10s user manual and fanuc control system technical manual
• Multicam MG103 connection problem
• Multicam CNC Router Series 1000 User Manual

[MCPservice]

User manual does not any electrical drawings, what are you looking for in the drawings?

[forhire]

User manual does not any electrical drawings, what are you looking for in the drawings?

The machine was recently moved. Everything labeled has been reconnected except the connections that connect directly to the M24 controller. The wire numbers do not correspond to anything in the cabinet. Additionally there is a small DC power adapter that was floating loose in the cabinet. A few of the wires have spade connectors which I'd assume correspond to the small DC power supply. There is an empty sleeve in the cabinet that I assume contained drawings at one time. At this point I may just have to wait.

[MCPservice]

Electrical Drawing for MG

[forhire]

Thanks for all your help. I have it up and working.