multicam 2000 tool park position adjustment

[measton]

Help! I have a multicam 2000 router and need to adjust the park position of the tools in the 11 slot tool rack, any sugestions , tips, procedures would be greatly appreciated.
thanks measton

Similar Threads:

• Need Help!- Fanuc 0i-MC How to force waiting tool pot move to tool change position
• Need Help!- Tool Wear Adjustment
• Need Help!- Tool change park position Multicam 5000
• Need Help!- B Axis Home Position Adjustment - How to?
• POSITION CODER ADJUSTMENT

[gfacer2]

I do not have a multicam but I used to run into issues when I accidentally switched to a different set of home coordinates - (my Centroid setup seems to have up to 5). When I did that, the spindle would crash the rack.

Anyhow I'll ask the questions that you'll need to answer to get help. Controller type, model, how far is it out of whack, is it one spot or many, etc?

They should be mapped out in a file maybe one per tool spot? That's is what you would need to revise but it sounds like a factory Rep course of help.

Good luck, and let us know some details.

GF

[MCPservice]

question....Are you sure this is a 2000 series router....I didn't think Multicam TX sold a 2000 series router...but they have changed their product line, if you would just verify.

Thanks