Good morning all,

I'm in France but I'm coming to get some help on this forum ...
I have a problem on a 1999 Mori Seiki SL-200 tour with a CN FANUC MSD-501 II.
All machine functions are OK, except when in FAPT mode, for the programmer, the screen freezes on the first FAPT programming page.
The machine can continue to operate but to unlock the screen it is mandatory to turn off and turn on the machine.
The problem came from the FAPT, so I did a CFINT to solve this problem, but that did not change anything ...
I have a backup of the FAPT parameters (in * .dat) that I would like to introduce into CN but I can't do it and I don't know if this will solve my problem…
I’ve already had FANUC on the phone, they know that re-entering the settings should fix the problem but they don’t know how to re-enter them.
Does anyone know a procedure for entering the FAPT parameters, or has someone already had a bp similar to mine?
Thank you in advance for your help…

Similar Threads: