Mori Seiki SL 7 - Zero Return not working


Results 1 to 4 of 4

Thread: Mori Seiki SL 7 - Zero Return not working

  1. #1
    Registered
    Join Date
    May 2007
    Location
    Singapore
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Mori Seiki SL 7 - Zero Return not working

    Hi Friends ,

    I have Mori Seiki lathe SL 7 with Fanuc 6T - B control. Zero return for both axis is not working by selecting zero retun mode and moving the axis using jog switch. It does not catch zero point and hitting the limit. But, in MDI mode, using code, it is able to zero return in both axis. Can anybody help to solve this problem in zero return mode ? Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2017
    Location
    United States
    Posts
    314
    Downloads
    0
    Uploads
    0

    Default Re: Mori Seiki SL 7 - Zero Return not working

    So it worked a few days ago and now it wont home? Or, you have never ran this machine before? Does it not move at all in zero return mode?



  3. #3
    Registered
    Join Date
    May 2007
    Location
    Singapore
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by generaldisarray View Post
    So it worked a few days ago and now it wont home? Or, you have never ran this machine before? Does it not move at all in zero return mode?
    Thanks for your reply. The machine had problems in spindle motor and drive. They were replaced. The machine was down for one year for some other problems also. Only few days before, I have taken over this machine. Previously, there was ER2 alarm on operating panel. I found it was due to reference return problem. Now, reference working in MDI mode. ER2 error is not there. The machine is working ok in auto mode. Still, the program downloading from laptop is not working. All the parameters are same as original values. Battery backup is ok. Though machine not working for one year, it was kept on everyday and tried some manual dry movements. Thanks.



  4. #4
    Registered
    Join Date
    May 2007
    Location
    Singapore
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Re: Mori Seiki SL 7 - Zero Return not working

    I have found the mode selector switch is not working , when it is selected for zero return mode. Corresponding input bit 101.7 is not changing to 1 from 0 when checked in Diagnosis page. So, it could be either switch or wire problem. So, I hope , I can solve this problem now and this thread will be useful to some people who have similar problem. Thanks.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mori Seiki SL 7 - Zero Return not working

Mori Seiki SL 7 - Zero Return not working