Mori Seiki sl15 with yasnac lx3 tool offset


Results 1 to 2 of 2

Thread: Mori Seiki sl15 with yasnac lx3 tool offset

  1. #1
    Registered
    Join Date
    Mar 2015
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Mori Seiki sl15 with yasnac lx3 tool offset

    Hey guys, I just acquired a Mori Seiki sl15. What i realize is the geometry for T 1 goes in offset 50 which is fine, but I also want to use Tool 1 with a different offset number, and I can't figure out how to accomplish this task. Any help would be greatly appreciated.

    This program ran fine

    N1 (FACE WNMG 432)
    G0 G20
    T0808
    G50 S2200
    G96 M04 S550
    G00 X1.35 Z0.1
    Z0.01
    G01 X-0.0624 F0.012
    Z0.02
    G00 X1.35
    Z0.
    G01 X-0.0624 F0.008
    G00 Z0.1
    (ROUGH TURN)

    Since this control doesn't have a G55, I'm trying to figure out how to use tool 8 with a different offset number. eg T0816.

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2016
    Location
    United States
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Mori Seiki sl15 with yasnac lx3 tool offset

    I'm not sure I understand the problem. If you call T0816 you're going to get tool 8 with whatever offset value is stored in offset 16. You can use whatever offset you call in the last 2 digits.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mori Seiki sl15 with yasnac lx3 tool offset

Mori Seiki sl15 with yasnac lx3 tool offset

Mori Seiki sl15 with yasnac lx3 tool offset