Need Help! Mori Duravertical 5100 Basics


Results 1 to 1 of 1

Thread: Mori Duravertical 5100 Basics

  1. #1
    Member UtahTechUniversity's Avatar
    Join Date
    Aug 2022
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Mori Duravertical 5100 Basics

    Hi There,

    I apologize for asking what is probably a beginner's question... but I'm new to running Mori machines. I have a 2014 Duravertical with the Fanuc control. I'm wondering how to set the work coordinate origin? And specifically, how to set the zero on specific axes rather than all of them at once? Any help would be appreciated!

    Thanks!
    Andrew

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2007
    Location
    USA
    Posts
    43
    Downloads
    0
    Uploads
    0

    Default Re: Mori Duravertical 5100 Basics

    Press OFFSETS. Press WORK, You can set the XYZ coordinates in G54 thru G59. Then call G90 G5? in the program.
    I think the position screen is where you can set the individual axis to zero.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mori Duravertical 5100 Basics

Mori Duravertical 5100 Basics

Mori Duravertical 5100 Basics