Mori Seiki MV-40M Way Cover Size? And Wiper/ Plastic in back?


Results 1 to 4 of 4

Thread: Mori Seiki MV-40M Way Cover Size? And Wiper/ Plastic in back?

  1. #1

    Join Date
    Aug 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Mori Seiki MV-40M Way Cover Size? And Wiper/ Plastic in back?

    I need to know the proper dimensions for the Mori Seiki MV-40M front Way Cover. I need to replace it but cannot take it off the machine for down time. I know it's 36" width with 5 pieces/ slides to it.

    Also the back plastic piece at the bottom of the backplate is about 62" in width and I don't know what it's purpose is but it's there and it's brittle and cracked so I need to replace it but don't know the exact dimension in length. It's bolted on there.

    If somebody could give me exact dimensions for these 2 things I would be very thankful.



  2. #2
    Member
    Join Date
    Feb 2009
    Location
    usa
    Posts
    6024
    Downloads
    0
    Uploads
    0

    Default Re: Mori Seiki MV-40M Way Cover Size? And Wiper/ Plastic in back?

    Um, without modeling it, its gonna be tough. There is a lot more underneath the top than you'd think. I've had sheetmetal shops fab new panels for them in a pinch, and I had a source for new wiper material, but no one i've known has actually made a complete cover. BTW just the rubber wiper set from Mori for a single cover can be >800.00



  3. #3

    Join Date
    Aug 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Jeez... Okay. It's a Mori Seiki MV-40M MF-M7 if that helps. I'm kind of stuck, hoping maybe somebody has replaced it and measured it before. I can't have the machine down so I'm trying to buy a new one from a company but they want me to send it in and I can't.



  4. #4
    Member
    Join Date
    Aug 2011
    Location
    United States
    Posts
    92
    Downloads
    0
    Uploads
    0

    Default Re: Mori Seiki MV-40M Way Cover Size? And Wiper/ Plastic in back?

    I was just looking for wipers for my 89 mv-40b. The wiper in there was a close match to a WIM19 from BUWW.

    I called several venders and it was mind bogling how much the wiper material can be. Quoted anywhere from 45-90 per meter
    Mori does stock the wipers and its about 600 / way cover set.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mori Seiki MV-40M Way Cover Size? And Wiper/ Plastic in back?

Mori Seiki MV-40M Way Cover Size? And Wiper/ Plastic in back?

Mori Seiki MV-40M Way Cover Size? And Wiper/ Plastic in back?