Mori Seiki MV40 '91
During the tool exchange procedure there was power down. After that the error code "EX 1270 Illegal movement" appeared .
Control unit is Fanuc MF 4. Mag. Switches KM41 and KM141 on the tool magazine as well as KM31 and KM131 (ATC arm) are checked and are functional.Relay board is functional also..
The manual movement of tool magazine is possible, anyting else is blocked.
Please help!
Sincerely,
Nenad Sakan
Similar Threads:
hello
The same mistake occurred to me on Mori seiki mv-junior.
When changing tools.
Fanuc O-M
if you have a solution, it would mean a lot to me ..
Thanks,,