We have an MV40M Fanuc MF-'MT (fanuc OMC=
It had a 910 parity alarm.
We cleared it
Loaded all the parameter and diagnostic
Now we have ab EX1047 Machine SPEC.PARAM.CLEARED
I know moriseiki protected this parameter with a diagnostic
I don{t have a print to ladder to resolv the problem
any person to help me with this the diagnostic o print to ladder to resolv the problem
Willydke
Similar Threads:
I resol mo problem
- - - Updated - - -
my machine work
ok
can you help me solve this ex 1047 alar in moriseiki
Hi Everyone,
I need help too.
Can you kindly share how to solve EX-1047 alarm?
I have input all parameters, except DIAGNOSTICS 0660-0669
It is impossible to input them.
Any help would be highly appreciated.
(Machine Mori-Seiki M300)
With kindest regards, Igor Kozlov
hola que tal como pudieron resolver su problema con ex 1047?
clear all parameters.
-input machine parameters and without turn off the machine input all pmc parameters.
-Turn off the machine
Probably some parameters of machine you will re input, because while are you enter the parameters the machine "want wich you turn off and turn on", but ignore them.
regards
Primero borra nuevamente todos los parámetros. Después ingrésalos nuevamente, pero no vayas a apagar tu máquina aún.sin haber apagado tu máquina ingresa los parámetros del PMC. Ahora sí ya puedes apagar tu máquina y vuelve a reingresar los parámetros y ya la puedes apagar si la máquina te lo solicita.
Saludos
Hello my friend
Can you reply me please how you resolved your
Ex1047 alarm of Mori seiki please help me thanks
Hi,
same problem mine MVC65-40 vmc machine
Please help me , how you fix error ?