Hello,
Anyone who has a Mori Seiki TV400 machine, Could you confirm me if the connection diagram is correct?. Thanks
Hello,
If anybody have tool change program for TV-400 with MSC-802M (MELDAS M50) please post it or PM me...
Many thanks in advance...
Hello,
Anyone who has a Mori Seiki TV400 machine, Could you confirm me if the connection diagram is correct?. Thanks
Hello..
This is my diagram of TV400 and cabinet... And the last one on my scheme is SPINDLE DRIVE (u can recognize it because of spindle FAN)D1 D2 D3 are X Y Z and D4 is for ATC (automatic tool change) and C5 in my case is for APC arm (automatic pallet change and it is a PLC axis C5 ) the last is the spindle drive and it is D6 (in scheme is Unit5)
Best regards..
Hello..
This is my diagram of TV400 and cabinet... And the last one on my scheme is SPINDLE DRIVE (u can recognize it because of spindle FAN)D1 D2 D3 are X Y Z and D4 is for ATC (automatic tool change) and C5 in my case is for APC arm (automatic pallet change and it is a PLC axis C5 ) the last is the spindle drive and it is D6 (in scheme is Unit5)
Best regards..
Thank you very much for the information, Can you share the manuals for the machine. Do you know if there are limit switches on the axes, and where are they located?
Hello,
I have a TV400 msc 802m and I need parameters for this machine. Anyone who has them and can help me, it Will be deeply apprecciate it.
Willing yo Pay
My email address JOLULA@yahoo.com
Thanks
Jolulank
www.doctornumerico.com
cnc physicians