MSC-516MB is a 16 control, you show 18 control.
What does the machine tag say for DWG number?
hi
we recently had some problem with power suply from machine and after replacing we found that we lost PMC parameters and we can not start the machine.
If anyone have the same machine and type and can share the PMC parameter, will be great.
PMC type is:MSC-516MB
Now we have an alarm:
EX 1047 Machine spec. param. cleared
i will be very greatfull for who can help me with finding the PMC paameters
Similar Threads:
MSC-516MB is a 16 control, you show 18 control.
What does the machine tag say for DWG number?
I'll see what i have. I'm assuming you dont have the original binder with the Fanuc Data sheets and electrical prints?
yeah i dont have will be apreciated if you find the PMC parameters
any news?
i offer also bonus for this job.
I have nothing that old in my files. Everything I have is i series.
thank you for your time!
Alright, made a couple calls.
Found a set, but need to know what operator panel you have. Take a picture and post it here. He can email me them next week.
I need the lower panel. The operator panel with the knobs or buttons. Mori was switching over to the newer style about that time.
i will send it to you tomorow during day!
thanks a lot!
Haven't seen a "CE" panel since Japan!
Should be a type 2 panel anyways, only difference was no color on the panel, and no labeling. See what I can do.
provide your e-mail address. I have similar machine here
Still waiting. Called the guy I know on monday, he was searching. I will not have PMC for a 4 axis though.
I HAVE THE PARAMETERS FOR MORI SEIKI MV 40 MF6 CONTROL. MAIL ME FOR THE SAME