Mori Seiki MV-40M Fanuc 18M PMC param.

[zavateandu]

hi
we recently had some problem with power suply from machine and after replacing we found that we lost PMC parameters and we can not start the machine.
If anyone have the same machine and type and can share the PMC parameter, will be great.
PMC type is:MSC-516MB

Now we have an alarm:
EX 1047 Machine spec. param. cleared

i will be very greatfull for who can help me with finding the PMC paameters

Similar Threads:

• help MORI SEIKI MV- 40 FANUC MF-M4
• Need Help!- Mori Seiki AL-2 Fanuc 10T
• mori seiki sl-3a with fanuc 6t
• Need Help Mori Seiki MV Jouniur Fanuc 10M
• Mori Seiki SL-20 Fanuc 10T

[underthetire]

MSC-516MB is a 16 control, you show 18 control.
What does the machine tag say for DWG number?

[zavateandu]

MSC-516MB is a 16 control, you show 18 control.
What does the machine tag say for DWG number?

ah yes sorry my mistake is a 16 control
in the dwg numer stays:I81440A13
if u need more info please let me know.
thank you in advance

[underthetire]

I'll see what i have. I'm assuming you dont have the original binder with the Fanuc Data sheets and electrical prints?

[zavateandu]

yeah i dont have will be apreciated if you find the PMC parameters

[zavateandu]

any news?
i offer also bonus for this job.

[underthetire]

I have nothing that old in my files. Everything I have is i series.

[zavateandu]

thank you for your time!

[underthetire]

Alright, made a couple calls.
Found a set, but need to know what operator panel you have. Take a picture and post it here. He can email me them next week.

[zavateandu]

if u need something specific just say and i will bring here
and again thank you for your time will be apreciated

[underthetire]

I need the lower panel. The operator panel with the knobs or buttons. Mori was switching over to the newer style about that time.

[zavateandu]

i will send it to you tomorow during day!
thanks a lot!

[zavateandu]

here u go




waiting for u response

[underthetire]

Haven't seen a "CE" panel since Japan!

Should be a type 2 panel anyways, only difference was no color on the panel, and no labeling. See what I can do.

[wuwear]

Haven't seen a "CE" panel since Japan!

Should be a type 2 panel anyways, only difference was no color on the panel, and no labeling. See what I can do.

Hello! I've downloaded pmc ladder diagram from MV40M MSC-518 machine. I have investigate ladder and found purpose 10 of 40 timers and some keep relays.
Can you send MV40E parameters ?I'd like to check if it close enough.
Danil

[dbstream]

provide your e-mail address. I have similar machine here

[wuwear]

provide your e-mail address. I have similar machine here

Thank You!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[zavateandu]

Haven't seen a "CE" panel since Japan!

Should be a type 2 panel anyways, only difference was no color on the panel, and no labeling. See what I can do.

any news ?i forgot to tell u this machine is 4 axes.
waiting for u reply a.s.a.p.

[underthetire]

Still waiting. Called the guy I know on monday, he was searching. I will not have PMC for a 4 axis though.

[raokmk2003]

I HAVE THE PARAMETERS FOR MORI SEIKI MV 40 MF6 CONTROL. MAIL ME FOR THE SAME