Mori Seiki SL-35 help


Results 1 to 1 of 1

Thread: Mori Seiki SL-35 help

  1. #1
    Member Tigman350's Avatar
    Join Date
    Nov 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Mori Seiki SL-35 help

    Good morning all, I have an SL-35 that is giving me fits....well probably more the incompetent repair company is giving me fits! I am hoping with some help I can trouble shoot this myself getting it back up and running. I attached an image of the alarm on the screen, the OT032 popped up after I unplugged the encoder cable to check continuity. we hired a repair company to help us, they came in, swapped the cables from the x axis to the z and the alarms followed the encoder, upon them telling us the encoder was defective we sent it off for repair, the repair company just emailed saying the unit tested fine and that nothing was wrong with it. Any suggestions? Encoder is good and cable tested good via continuity test, what is next?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Mori Seiki SL-35 help-mori-seiki-sl-35-alarms-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mori Seiki SL-35 help

Mori Seiki SL-35 help

Mori Seiki SL-35 help