We have a G-code editor that can do programmable mass edits. Try this:
A) Download PC-DNC Editor 4.0.5 from our website: https://www.pc-dnc.com/downloads
B) It will install and run in demo mode for 30 days
C) Use “File/Open” to open one of your Okuma files
D) Click the “Modify” menu, then click “Convert file”
E) Click “Add to list”, then enter “Okuma to Mori” as the name of a conversion profile
F) In the “Mirror” box, put the letter “X”. In the “Around” box, enter “0” (zero, not letter o)
G) In the “Format” box, enter the letter “F”, then select the Mori’s federate decimal increment
H) In the “Swap” box, enter “M03”, in the “With” box, enter “M04”
I) Increment the “Step” number in the “Swap” line, then enter “G02” and “G03”
J) Click the SAVE button to save this file conversion profile.
Now, any time you open an Okuma file, click “Modify/Convert”, select “Okuma to Mori”, and click the “Convert” button. The Editor will do each modification in sequence. If you don’t like what just happened, click “Modify/Undo” to put everything back.
If you need to convert Mori programs back into Okuma format, create and save another conversion profile called “Mori to Okuma” it will do pretty much the same thing (only the F-code format would be different)
You can have up to 20 “Steps” of each “Modify” function in each profile, and you can have as many conversion profiles as you like.