NEED HELP SL3 TRANSMISSION PROBLEM


Results 1 to 2 of 2

Thread: NEED HELP SL3 TRANSMISSION PROBLEM

  1. #1
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default NEED HELP SL3 TRANSMISSION PROBLEM

    HAVE SL3 WITH FAN 10TE-F CONT
    Transmission has stopped transferring torque to spindle.
    Can anyone out there tell me likely cause?
    What actuates the gear shift and applies pressure to clutch pack?
    I am wondering if the small trochoidal oil pump supplies pressure to do this, or is it for lubrication only?
    We have no documentation for this old machine.
    In the dark.

    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Sep 2004
    Location
    us
    Posts
    148
    Downloads
    0
    Uploads
    0

    Default Re: NEED HELP SL3 TRANSMISSION PROBLEM

    AFAIK there are electrically actuated clutches, either 12v or 24vdc. The pump is for lubrication



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

NEED HELP SL3 TRANSMISSION PROBLEM

NEED HELP SL3 TRANSMISSION PROBLEM