Sorry to revive an old thread.
we got a mori seiki SL-3 with a yasnac lx1 control and i figured out most of the controls except wen running a program it tries to crash the machine, it runs right past the face of the part and keeps going twoards tha chuck, any help is appreciated, maybe my tool offsets are wrong or my program, here's what camworks spits out.
%
O0002
N1 G20
N2 M42
N3 G50 X0 Z0 S3000
N4 G50 T5200
N5 G00 G97 S1000 F.0161 M08
N6 M03
N7 G99
N8 G00 X-8. Z.1071
N9 G99
N10 X-1.0141
N11 G01 X-.8 Z0
N12 Z-.0755
N13 G02 X-.9017 Z-.1091 R.8007
N14 X-.944 Z-.1503 R.0507
N15 G01 Z-.2091
N16 X-1.
N17 X-1.0141 Z-.2021
N18 G00 X-1.2141
N19 Z.0071
N20 X-.6509
N21 G01 X-.6368 Z0
N22 Z-.0322
N23 G02 X-.8 Z-.0755 R.8007
N24 G01 X-.8194 Z-.0731
N25 X-.8494
N26 G00 X-1.0194
N27 Z.01
N28 X-.5555
N29 G01 X-.4736
N30 Z0
N31 G02 X-.6368 Z-.0322 R.8007
N32 G01 X-.6555 Z-.0287
N33 G00 Z.108
N34 X-.2728
N35 Z.008
N36 G01 X-.2838 Z-.0003
N37 G02 X-.8725 Z-.1294 R.7757
N38 X-.894 Z-.1503 R.0257
N39 G01 Z-.2341
N40 X-.9686
N41 X-.9827 Z-.2271
N42 G51 G00 X-1.1827 M09
N43 M30
%
part origin is set up at the front of the part but its just not working. i have 7 years experience with fadal but its my first time using a lathe.
thanks in advance.