Best Cutter for this job??


Results 1 to 3 of 3

Thread: Best Cutter for this job??

  1. #1
    Registered
    Join Date
    Mar 2016
    Location
    United Kingdom
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Best Cutter for this job??

    Good Morning guys and gals,

    Im looking for some experience on this part in the picture on what the best cutter for this application would be,

    Bit of back ground....

    I Have an XYZ 1000LR 6 months old,

    The hole metal workings is still very new to me even after 6 months of tool making.

    This part is the deepest cavity tool i have ever done, So I am looking to be pointed in the right direction for a cutter to cut this depth. The shut off to the lowest point is just shy of 80mm.

    My standard cutting depths per pass i run on the alloy this will be machined from are 5mm stepdowns.

    I should also mention that I will need a roughing and finish tool.

    Any Info is greatly received

    Kindest Regards Tom

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Best Cutter for this job??-screenshot-14-jpg  


  2. #2
    Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    4842
    Downloads
    0
    Uploads
    0

    Default Re: Best Cutter for this job??

    The key to cutting molds like this is to find a tool that's long enough to reach the bottom of the cavity at the deepest part, that's narrow enough to give you vertical corners that have no more than the required radius. The horizontally-oriented corners aren't as big a problem, since you can program extra operations with long tools that have thick shanks but small tips (the shanks might fend you off the corners, requiring some hand work to touch them up). Sometimes it's impossible to find a tool that's long enough and skinny enough to do your finish passes. If you can't increase the corner radii, then the usual alternative is to carve a piece of graphite to the positive form (so those problematic corners are easy to make sharp), and use that to burn the cavity with a sinker EDM machine.

    Andrew Werby
    https://computersculpture.com/


  3. #3
    *Registered User* toolmakerdarren's Avatar
    Join Date
    Aug 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Best Cutter for this job??

    i would ruff it out with ball tipped cutter probably just go down to 10mm dia cutters ,make a copper electrode and spark it out, cnc sparker will do that nice and quick, with big spark gap and large orbit then send in a finish electrode



  4. #4
    *Registered User* noami-flina's Avatar
    Join Date
    Aug 2018
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    Hello, maybe you could see and try the laser cutter of China Perfect Laser,their delivery was done on time and the metal laser cutter was well made with a high-grade appearance. The machines, the technology, the quality all are really good, and the technicians who come to the door are very passionate and ambitious, all in all, they are professional indeed,I think maybe they can give some advises to you.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Best Cutter for this job??

Best Cutter for this job??

Best Cutter for this job??