BOY 15 Injection Molding Machine Manual


Results 1 to 8 of 8

Thread: BOY 15 Injection Molding Machine Manual

  1. #1
    Registered
    Join Date
    Mar 2012
    Location
    US
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default BOY 15 Injection Molding Machine Manual

    I have a BOY 15 injection molding machine that need need a lot of work to bring it back to life. Does any one have access to technical manual for this machine? One more thing, what is the difference between BOY 15 and 15s???
    Thanks

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2013
    Location
    New Zealand
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Couldn't reply to your PM. Yes, however the front page is missing. Unfortunately it's too big to fit in my sheet-feed scanner and has too many pages to be done by hand. I think Holycross has a scanned copy.



  3. #3
    Registered
    Join Date
    Mar 2012
    Location
    US
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default

    are you interested in selling it?



  4. #4
    Registered
    Join Date
    May 2013
    Location
    New Zealand
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    No sorry.



  5. #5
    Registered
    Join Date
    Nov 2013
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    I think these manuals seem to be an issue with most companies. I might think of starting a section and asking people to contribute to a online resource. Not sure how many will oblige.



  6. #6
    Registered
    Join Date
    Jan 2013
    Location
    US
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: BOY 15 Injection Molding Machine Manual

    Hi,
    Have a Boy 22s. Looking for an Operating Manual for it or a Boy 15.

    Thanks,



  7. #7
    Registered
    Join Date
    Mar 2012
    Location
    USA
    Posts
    373
    Downloads
    0
    Uploads
    0

    Default Re: BOY 15 Injection Molding Machine Manual

    I just scanned my manual. I broke it into four pieces and total is about 20 megs so can't upload it here. If someone has an account on one of the file share sites where you can put it somewhere and post a link to it here send me an email and I will send you a copy. brian@eamanufacturing.com



  8. #8
    Registered
    Join Date
    Jan 2013
    Location
    US
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: BOY 15 Injection Molding Machine Manual

    brian257,
    That's great. Can you try emailing them one part at a time?

    I'm also looking for heater bands. If anyone has a source for those that would be a great help.

    Thanks,
    CMC

    Last edited by CodeMonkeyCrew; 11-15-2018 at 03:55 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

BOY 15 Injection Molding Machine Manual

BOY 15 Injection Molding Machine Manual