Anyone know how to retrieve the ladder off my controller?


Results 1 to 3 of 3

Thread: Anyone know how to retrieve the ladder off my controller?

  1. #1

    Default Anyone know how to retrieve the ladder off my controller?

    Anyone know how to retrieve the ladder off my controller?

    It is a DMG Mori MAPPS II controller running Meldas 64 on the back end.

    NC unit hardware FCU-MU011
    Main control card: HR113
    COMCARD : HR531

    Similar Threads:


  2. #2
    Member MJRx's Avatar
    Join Date
    Jun 2021
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Anyone know how to retrieve the ladder off my controller?

    Just dump the ALL3 settings?

    see:
    https://www.cnczone.com/f...ladder.369010/



  3. #3
    Member Mustafa01980's Avatar
    Join Date
    Mar 2024
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Anyone know how to retrieve the ladder off my controller?

    You can upload with Mitsubishi Gx-developer 2 software. You need Rs232 port and 25pin to 9pin pgm cable.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Anyone know how to retrieve the ladder off my controller?

Anyone know how to retrieve the ladder off my controller?