Need Help! Mitsubishi M60 giving INIT PARAM ERROR


Results 1 to 1 of 1

Thread: Mitsubishi M60 giving INIT PARAM ERROR

  1. #1
    Member jcollett's Avatar
    Join Date
    Jan 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Exclamation Mitsubishi M60 giving INIT PARAM ERROR

    I have a Cubic Diamond 42CSL machine with a M60 Controller. I had to re-upload the parameters after they were lost due to changing the battery. After the parameters were uploaded I have the following alarms:

    Z70 ABS ILLEGAL 0002 CB
    Y05 INIT PARAM ERR 1001 0000
    M01 OPERATION ERROR 0006 B

    I understand that the Z70 and M01 alarm have to be fixed by manually moving and positioning the machine. However, I am unsure about how to fix the Y05 Parameter error... I included an attachment with the 1001 parameter screen.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Mitsubishi M60 giving INIT PARAM ERROR-img_2994-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mitsubishi M60 giving INIT PARAM ERROR

Mitsubishi M60 giving INIT PARAM ERROR

Mitsubishi M60 giving INIT PARAM ERROR