Mitsubishi M60 giving INIT PARAM ERROR

[jcollett]

I have a Cubic Diamond 42CSL machine with a M60 Controller. I had to re-upload the parameters after they were lost due to changing the battery. After the parameters were uploaded I have the following alarms:

Z70 ABS ILLEGAL 0002 CB
Y05 INIT PARAM ERR 1001 0000
M01 OPERATION ERROR 0006 B

I understand that the Z70 and M01 alarm have to be fixed by manually moving and positioning the machine. However, I am unsure about how to fix the Y05 Parameter error... I included an attachment with the 1001 parameter screen.

Similar Threads:

• Need Help!- Mitsubishi controller giving AL023 / 10 SPNDL SPEED ERROR.
• No init found. Try passing init= bootarg. Controller won't fully boot.
• Need Help!- error 1050 init.shift fail
• Need Help!- SCM TECH 80 CNC ROUTER SOFTWARE GIVING ERROR
• Problem- Centriod Giving error message