Pinnacle vmc 1100s Meldas 60 cant change tool , Help !!!


Results 1 to 2 of 2

Thread: Pinnacle vmc 1100s Meldas 60 cant change tool , Help !!!

  1. #1
    Member slagga9001's Avatar
    Join Date
    Dec 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Pinnacle vmc 1100s Meldas 60 cant change tool , Help !!!

    The batteries died and all the parameters got lost but i reinstalled them with help from the original settings for the machine. Everyrhing seems to work except The toolchange , ill White in T02 M06 in Edit and the machine gets the right tool does the spindelorientation and the pot with the correct tool comes down but then it just stopes , The arm wont move. Help whats wrong !

    Similar Threads:


  2. #2
    Member
    Join Date
    Aug 2016
    Location
    Åland Islands
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: Pinnacle vmc 1100s Meldas 60 cant change tool , Help !!!

    sounds like the part of the toolchange that checks to see if the arm is in position(prox switch) has the wrong param for that. Grab the manual and start learning how to read ladder logic



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Pinnacle vmc 1100s Meldas 60 cant change tool , Help !!!

Pinnacle vmc 1100s Meldas 60 cant change tool , Help !!!