Mitsubishi Meldas 500 problem with parameter


Results 1 to 2 of 2

Thread: Mitsubishi Meldas 500 problem with parameter

  1. #1
    Member
    Join Date
    Feb 2009
    Location
    Egypt
    Posts
    66
    Downloads
    0
    Uploads
    0

    Default Mitsubishi Meldas 500 problem with parameter

    I have a question to everyone who knows about this control. (Meldas 500)

    I had a problem with parameter and had to Initialize the control.

    As I also have problem with the rs232 port i can not upload the parameters. so i have to input them by hand. but after i did the Initialization only axis x appear. also in the parameters I just have the rows for the x axis to input the parameter in. y and z don t show.

    As well only 9 out of the 40 pages for the spindle parameter appear.

    Is there a way i can fix this.

    thank you all for any information...

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2012
    Location
    USA
    Posts
    361
    Downloads
    0
    Uploads
    0

    Default Re: Mitsubishi Meldas 500 problem with parameter

    I don't know the answer, but Mitsubishi may have the manuals for your vintage control available for download on their website. On the docs for my M3 control, the information on how to configure the serial port function, baud, stop, parity, are all detailed. It isn't very easy reading, to be honest, but it is there. Sadly, My M3 control is likely not the same as yours 500, so I don't think I can really provide you with further assistance.

    Good luck!
    Alan



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mitsubishi Meldas 500 problem with parameter

Mitsubishi Meldas 500 problem with parameter