Problem Mitsubishi meldas mds-r-v1-80 error 12 and 14


Results 1 to 3 of 3

Thread: Mitsubishi meldas mds-r-v1-80 error 12 and 14

  1. #1
    Registered
    Join Date
    May 2018
    Location
    Brazil
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Mitsubishi meldas mds-r-v1-80 error 12 and 14

    hello,
    Hi, I'm new here, I have a Mitsubishi servo drive that is presenting this error "12 and 54" when it is powered up. Has anyone ever had this problem? Which component in the CPU is faulty?
    Thank you for your help.

    Similar Threads:


  2. #2
    Member
    Join Date
    Sep 2017
    Location
    Bahrain
    Posts
    139
    Downloads
    0
    Uploads
    0

    Default Re: Mitsubishi meldas mds-r-v1-80 error 12 and 14

    The drive contol card has to be repaired. It might also cause if signals from power section to control section is mafunctioning.



  3. #3
    Registered
    Join Date
    May 2018
    Location
    Brazil
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by navinbhas View Post
    The drive contol card has to be repaired. It might also cause if signals from power section to control section is mafunctioning.
    if I feed only the CPU board already blinks the two errors, 12 and 54. I do not have a card to change, can I fix it? What could be damaged?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mitsubishi meldas mds-r-v1-80 error 12 and 14

Mitsubishi meldas mds-r-v1-80 error 12 and 14