Need Help! Tapered rolling bearings upgrade for mini lathe .. Bearings question


Results 1 to 2 of 2

Thread: Tapered rolling bearings upgrade for mini lathe .. Bearings question

  1. #1
    Member
    Join Date
    Jan 2016
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Tapered rolling bearings upgrade for mini lathe .. Bearings question

    I have looked online to see a lot of people are using the SKF 30206 30x62x17.5mm tapered bearings upgrade for the mini lathe, but they have to make adjustments to the plastic covers for the extra 1.5mm difference of these tapered bearings to the stock 30x62x16mm Bearing. I have seen that there is SKF 30206 30x62x16mm bearings. Wouldn't it be easier to just purchase these SKF 30206 30x62x16mm tapered bearings as the stock bearing and these tapered are the exact same size, instead of the 17.5mm bearings?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Sep 2017
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Tapered rolling bearings upgrade for mini lathe .. Bearings question

    I suspect the 16mm wide bearings are angular contact ball bearings. The tapered roller bearings are substantially stiffer, and will carry a lot of load in both the radial and axial directions, whereas the angular contact ball bearings will deflect under load a lot more.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tapered rolling bearings upgrade for mini lathe .. Bearings question

Tapered rolling bearings upgrade for mini lathe .. Bearings question