Take a look at this. https://github.com/TimPaterson/Fusion360-Batch-Post
Hello,
Could someone with the pro version of fusion 360 post some script with a manual tool change in it?
I have the free version that does no allow even manual tool changes to be posted as singe program so I would like to edit the different programs together and incorporate a manual tool change. I am very new to g code and I think it would help me to see how the fusion Milltronics post processor handles manual tool changes.
Thanks,
Shawn
My control is centurion 6.
Similar Threads:
- Need Help!- Fusion 360 tool change and lack of clearance height (Fadal 88HS)
- Need Help!- Gangtooling, invert X -> Tool 1 Fusion 360 Post processor
- Manual Tool Change on Sherline 5400 Mill using LinuxCNC and Autodesk Fusion 360
- Need Help!- Tormach Fusion 360 Post - Why the M1's before tool change
- Homing, Offsets,Tool Change Pos and Fusion 360:)
Take a look at this. https://github.com/TimPaterson/Fusion360-Batch-Post
Face off a 2'' square block with a 0.500'' endmill, tool change is at N4
O1001
N1 G90 G94 G17
N2 G20
N3 G32
(FACE1)
N4 T1 M6
N5 S7639 M3
N6 G54
N7 M8
N8 G0 X1.365 Y-1.9085
N9 G43 Z1.12 H1
N10 G0 Z0.72
N11 G1 Z0.53 F126.1
N12 G18 G3 X1.315 Z0.48 I-0.05
N13 G1 X1.04
N14 X-1.04
N15 G17 G2 Y-1.492 J0.2082
N16 G1 X1.04
N17 G3 Y-1.0755 J0.2083
N18 G1 X-1.04
N19 G2 Y-0.659 J0.2082
N20 G1 X1.04
N21 G3 Y-0.2425 J0.2082
N22 G1 X-1.04
N23 G18 G3 X-1.09 Z0.53 K0.05
N24 G0 Z1.12
N25 G17
N26 M9
N27 G32
N28 G28 G91 X0 Y0
N29 G90
N30 M30
Jim Dawson
Sandy, Oregon, USA