Milltronic Partner 1 series H

[Allsportcnc]

got the machine with out the reset relay install one according to original schematics but still missing a connection because it can't be reset. This machine came with AC servos. if anybody have one of this machine, and can send me a picture of how the relay is wired it will be a good help. of if any body know a technician, I'm in Florida. Thanks


Similar Threads:

• Milltronics Partner 1 Series H Purchase
• Milltronics Partner 1 Series H CAM
• Partner 1 Series H - Problem with Video
• Milltronics Partner 1 Series H - Can 45 degree pull-studs be used?
• Partner VM16 series A stuck in dos

[nickstewartroc]

got the machine with out the reset relay install one according to original schematics but still missing a connection because it can't be reset. This machine came with AC servos. if anybody have one of this machine, and can send me a picture of how the relay is wired it will be a good help. of if any body know a technician, I'm in Florida. Thanks

Hey Allsportcnc,
Do you still need pics? Also whereabouts in Florida are you? I'm over in Mount Dora with a Partner 1 if you need to physically see one

-Nick