Hi,
I'm an Italian guy, and I was asked by a friend to recover a hard disk from a Milltronics VM-24 Partner 1 with Centurion 6.
The hard disk was damaged and I was able to recover only a fraction of the files.
I tried to install dos 6.22 on a new hard disk and copy the recovered files; the CNC.exe program starts, but shows some garbage text every now and then.
Where can I recover the files for this type of machine?

The CNC only had one hard drive with this structure:
C:
C:/CNC
C:/DOS
C:/PARTS

Inside the CNC folder there are three other folders, parts, ram and rom.

I have no experience with this type of machine, and am looking for any advice.

Similar Threads: